Polymer road mats and geosynthetic materials

SCOPE OF APPLICATION:
temporary prefabricated driveways and platforms, in conditions of sand, clay, waterlogged soils, swamps, asphalt/lawn protection, crossings through communications, designed for the movement of tracked and wheeled vehicles weighing more than 150 tons

ADVANTAGES OVER TRADITIONAL SOLUTIONS:
1. Mobility – the possibility of multiple shifting;
2. No preparation of the base is required - the possibility of laying on swamps, waterlogged soils;
3. High speed of installation/disassembly (1 plate – 5 minutes, 1 km of travel – less than 48 hours);
4. Low weight (5 times lighter than w/w plates of similar size);
5. Operating temperature from -60°C to +60°C;
6. Payback for 4-5 times of application.

ADVANTAGES OVER SIMILAR PRODUCTS:

1. The lowest price (the cost of raw materials has no sharp fluctuations, with the same permissible loads);

2. The highest coefficient of adhesion, safe for urban transport ((steel/wet plate surface – 0.4) due to elastomers, regardless of the wear of the plates – ensures the accuracy and safety of work);

3. 100% working area (there is no prohibition on movement along the edge of the plate);

4. It is possible not to connect (under certain conditions due to the coefficient of friction and the weight of the plates, while significantly reducing the laying time);

5. Impact resistance and elasticity, resistance to hard, sharp elements, heavy objects falling on the plates, including in winter;

6. Damping properties when used as a base for equipment;

7. Dynamic load of more than 300 tons/m2 (allowed on weak soils);

8. The possibility of laying on irregularities, use for moving through communications;

9. Polymer composition (without the presence of materials that break down under the influence of moisture and embrittlement at subzero temperatures, resistance to any aggressive media);

10. Convenient dimensions for transportation by any transport;

11. No special tools are required for mounting/dismounting;

12. The thickness of the plates is measured strictly by the body of the plate;

13. Environmental friendliness, openness of production (the composition of the plate and the production process are not hidden).